Water purification information

What are the reasons for the pollution of pure water equipment?

Views : 66280
Update time : 2021-11-24 14:29:34
There are several explanations for the pollution of pure water equipment: the pure water source of this equipment is the effluent of urban tap water after ultrafiltration. The water quality is ideal, but some fungi reproduce by spores. Although municipal tap water has been chlorinated and disinfected before ultrafiltration, some fungal spores may be in a state of suspended animation and enter reverse osmosis. Reducing agent is added to the reverse osmosis inlet pipe to remove residual chlorine in the water. There is no oxidizing bactericide in the pipeline from the reverse osmosis feed water pump to the reverse osmosis outlet water, which creates good living conditions for other microorganisms such as anaerobic fungi, so that they can multiply rapidly in these parts.

The front-mounted safety filter of the pure water equipment is the filtering equipment before reverse osmosis, with a filtering accuracy of only 5m, which has a strong ability to intercept pollutants. When the intercepted material gathers together, it becomes an ideal environment for microorganisms to multiply. Other similar equipment also has many cases where foreign matter inside the safety filter affects the pure water equipment. Fungi-like substances enter the reverse osmosis body with the influent, and multiply inside the reverse osmosis, which affects the operation of the equipment.

1. Location selection of pure water equipment: The water softener must be placed on a firm level ground, and the distance from the drain is good. The distance from the boiler and other heat sources must be greater than 3m, and it is also forbidden to approach acidic liquids or gases. If additional water treatment equipment is needed, place should be reserved.

2. Regarding the location of the recovery salt tank and resin:

It should be placed as close to the exchange column as possible. In order to make full use of the salt solution, try to shorten the size of the salt-absorbing plastic tube.

3. About filling quartz sand and resin:

(1) To ensure uniform water distribution, try to spread 150~200mm high-quality quartz sand on the bottom of the exchange column.

Then fill with resin and check the length and suitability of the intermediate riser.

 
Related News
Read More >>
Do you know how to reduce the operating costs of RO reverse osmosis water treatment plants? Do you know how to reduce the operating costs of RO reverse osmosis water treatment plants?
Sep .29.2024
The principle of reverse osmosis technology is higher than the osmotic pressure of the solution, based on other substances can not pass through the semi-permeable membrane and these substances and water to leave.The membrane pore size of the reverse osmosis membrane is very small, so it can effectively remove dissolved salts, colloids, microorganisms, organic matter, etc. in water.RO system because there is a high-pressure pump, and need to add a special scale inhibitor, high operating costs.How do we reduce the operating costs of the RO system?
Do you know what common instruments/meters are needed for reverse osmosis systems? Do you know what common instruments/meters are needed for reverse osmosis systems?
Sep .29.2024
In order to make the RO device can be safe and reliable operation, easy to monitor the operation process, should be equipped with the necessary instrumentation and control devices, generally need to install the instrumentation has a temperature meter, flow meter, pressure meter, conductivity meter, oxidation potential meter, chlorine meter, pH meter, specific as follows:
Does your reverse osmosis equipment often wash the membrane, change the membrane? Does your reverse osmosis equipment often wash the membrane, change the membrane?
Sep .27.2024
Users reflecting their own purchase of reverse osmosis equipment frequently wash membrane, reverse osmosis membrane use life is short and other issues. Today Susan organized a compilation of reverse osmosis equipment for reference, welcome to exchange, correction.